DT Series Drummed Asphalt Melter Uses the Waste Gas From Separate Thermal Oil Boiler to Heat Up the Drum for Bitumen Melting That Is High Efficient and Energy Saving Also Enviroment Protection.

DT Series Drummed Asphalt Melter Uses the Waste Gas From Separate Thermal Oil Boiler to Heat Up the Drum for Bitumen Melting That Is High Efficient and Energy Saving Also Enviroment Protection.

This series of equipments are used for decanting asphalt out of drums and heating up asphalt. They make fully use of hot gas of Burner to make asphalt coming out of drums, and use the hot oil heating coils to indirectly heat up asphalt, which can prevent asphalt from aging during heating. They...

Product Details

This series of equipments are used for decanting asphalt out of drums and heating up asphalt. They make

fully use of hot gas of Burner to make asphalt coming out of drums, and use the hot oil heating coils to

indirectly heat up asphalt, which can prevent asphalt from aging during heating. They also have the

functions of dehydration and automatically removing residue. This series of equipments not only greatly

save energy sources and manpower, but also perfectly protect environment.

Our company was the first one to develop this equipment in the world.

The equipment mainly consists of Main body, Hot oil Heater, Asphalt Pump and Device of removing

residue.


1.   Protecting environment: closed-construction and no pollution.

2.  Saving energy: which make fully use of hot gas (320-450℃) of Burner to melt and make asphalt coming out of drums (it is about150℃ while waste gas was let off to air). The closed-construction saves 50% energy sources compared with the exposed one.

脱桶设备结构示意图.jpg

3. Taking asphalt out of drums thoroughly: the equipments use hot gas (320-450℃) of Burner to directly heat up the wall of drums, asphalt near the wall of drums can be rapidly melted, and then the whole asphalt in drum will discharge thoroughly.

4. Having the function of automatically removing residue with a residue filter.

SNV38731_副本.jpg


5.   Perfect applicability: it can be applicable to many types of drums. It doesn’t influence operation even if the drum is out of shape.

6.Better dehydration: it uses asphalt pump with vast displacement to realize inner-cycle and sub-atmospheric dehydration of asphalt.

7. High reliability: the equipments introduce automatically control system and international-brand auto-ignite burner.

8. Easy to assemble and disassemble.

 

Model

DT3

DT6

DT8

Productivity(t/h)

3-4

6-8

8-10

Temp. of finished asphalt (℃)

120-140

120-140

120-140

Drums per   batch

20

32

44

Thermal Capacity of Hot Oil Furnace(kcal/h)

30×104

50×104

60×104

Temp. of thermal oil (℃)

200-240

200-240

200-240

Total power   capacity (kW)

36

38

38

Total Mass(kg)

17000

22000

28000

Overall Dimensions (L×W×H) (mm)

8000×1750×2560

9050×2550×2560

12000×2550×2560




Inquiry